Brand: Bel-Art
Model: Labmat
Labmat Bench Liner Rolls & SheetsWhite or Biohazard Safety OrangeDisposable Labmat™ Bench Liner speeds clean-up and safeguards work surfaces from stains, spills and wear. Simply roll up and discard after contamination.Highly absorbent upper surface traps up to 420ml/m² of water, dyes, corrosive ..
Brand: Bel-Art
Model: H18310-0000
This clear acrylic level surface helps in pouring immunological plates, horizontal agarose gels and acrylamide sequencing gels.
• Each leg is adjustable
• Inset leveling bulb below the working surface assists in accurate adjustment
• Rigid platform is 20.3 x 20.3 x .95cm thick (8 x 8 x ⅜")..
Brand: Bel-Art
Model: F20321-1665
Bearing InsertsFor Safe-Lab Stirrer Bearings, PTFE (Pack of 2)With Stopper-Loc™ NutStopper-Loc™ Nut allows stirrer bearing to be locked to outer ground joint when stirring viscous materials for long periods of time. Complete with Stopper-Loc™ Nut and two Teflon® PTFE insertsReplacement Teflon® PTFE ..
Brand: Bel-Art
Model: H24679-0000
Clear polyethylene ribbed matting can be used for lining laboratory tables, shelves, trays, etc.
• Trims easily with scissors
• Works well under drums or carboys
• Dimensions: 0.25mm (0.010") with 0.7mm (0.030") thick ribs, 76cm (30") wide x 15.2 meter (50ft)..
Brand: Bel-Art
Model: F37015-3000
This highly accurate Warming Plate, set at an optimal 37°C (±1°C), is designed to Trypsinize Cells during cell passaging.
• Avoids numerous entries into the CO2 incubator which alter its atmosphere, injuring ongoing experiments in the incubated cultures
• Increases cell viability by keeping cells a..
Brand: Bel-Art
Model: H13416-0001
Molded in rigid plastic which won’t scratch like metal, these calipers are non-conducting, corrosion resistant, and lightweight in the hand for easy handling.
• Dial type calipers measure up to 150mm in 0.1mm increments
• 33mm (1.3") diameter dial is rotatable beneath the pointer allowing for ‘diff..
Brand: Bel-Art
Model: H13417-0000
Take measurements with speed and ease using the Digi-Max™ digital slide caliper. The LCD display immediately indicates the exact measurement taken with push button selection between metric and English scales and a self-zeroing feature for accuracy of ±0.1mm (0.004").
• Metric scale to 150mm; Englis..
Brand: Bel-Art
Model: F24020-0000
Fluo-Kem Teflon Lab-Thread TapeLength: 7.6 Meters (Pack of 3)Lubricates and Seals without Grease or AdhesivesPure, non-sintered Teflon® PTFE Lab-Thread Tape contains no adhesive, yet does a superior job of sealing small apertures. Conforming to irregularities of surfaces, threads and joints of all t..
Brand: Bel-Art
Model: H38878-0010
The Frigimat® eliminates the need to buy large quantities of dry ice when only a little is needed. It employs the Joule- Thomson effect to produce a solid 454gm (16 oz) block of dry ice in one to two minutes, and the block can be removed in just 30 seconds.
• Brass relief valve safely vents excess..
Brand: Bel-Art
Model: F13635-0014
Porous one foot polyethylene rods can withstand temperatures up to 93ºC (200ºF).
• Coarse grade porosity with an average pore size of 110 microns..
Brand: Bel-Art
Model: F13635-0012
Porous one foot polyethylene rods can withstand temperatures up to 93ºC (200ºF).
• Coarse grade porosity with an average pore size of 110 microns..
Brand: Bel-Art
Model: H13639-0518
Fritware® High-density polyethylene sheets are supplied in medium or coarse porosity.
• Can be cut, sawed, formed, machined and welded to fabricate special items made partly or wholly of this porous material
• Medium porosity style has an average pore size of 70 microns
• Coarse porosity style aver..
Brand: Bel-Art
Model: H13638-5116
Fritware® High-density polyethylene sheets are supplied in medium or coarse porosity.
• Can be cut, sawed, formed, machined and welded to fabricate special items made partly or wholly of this porous material
• Medium porosity style has an average pore size of 70 microns
• Coarse porosity style aver..
Brand: Bel-Art
Model: H13638-0514
Fritware® High-density polyethylene sheets are supplied in medium or coarse porosity.
• Can be cut, sawed, formed, machined and welded to fabricate special items made partly or wholly of this porous material
• Medium porosity style has an average pore size of 70 microns
• Coarse porosity style aver..
Brand: Bel-Art
Model: H13638-0518
Fritware® High-density polyethylene sheets are supplied in medium or coarse porosity.
• Can be cut, sawed, formed, machined and welded to fabricate special items made partly or wholly of this porous material
• Medium porosity style has an average pore size of 70 microns
• Coarse porosity style aver..
Brand: Bel-Art
Model: H13638-0018
Fritware® High-density polyethylene sheets are supplied in medium or coarse porosity.
• Can be cut, sawed, formed, machined and welded to fabricate special items made partly or wholly of this porous material
• Medium porosity style has an average pore size of 70 microns
• Coarse porosity style aver..
Brand: Bel-Art
Model: F24675-0020
Labmat™ Bench LinerSize: 20 x 24 in. Sheets, White (Pack of 100)Disposable Labmat™ Bench Liner speeds clean-up and safeguards work surfaces from stains, spills and wear. Simply roll up and discard after contamination.Highly absorbent upper surface traps up to 420ml/m² of water, dyes, corrosive chemi..
Brand: Bel-Art
Model: F24675-1000
Labmat™ Bench Liner50 Feet, Biohazard Safety OrangeDisposable Labmat™ Bench Liner speeds clean-up and safeguards work surfaces from stains, spills and wear. Simply roll up and discard after contamination.Highly absorbent upper surface traps up to 420ml/m² of water, dyes, corrosive chemicals or radio..
Brand: Bel-Art
Model: F24675-0000
Labmat™ Bench LinerLength: 50 Feet, WhiteDisposable Labmat™ Bench Liner speeds clean-up and safeguards work surfaces from stains, spills and wear. Simply roll up and discard after contamination.Highly absorbent upper surface traps up to 420ml/m² of water, dyes, corrosive chemicals or radioactive sol..
Brand: Bel-Art
Model: F13390-0000
A handy metric diameter gauge that will end doubt about inside or outside diameters.
• Measures glass and plastic tubing, connecting pieces, rods, test tubes, etc. between 1.5 and 16mm
• Holes on one side measure O.D.; pins on the other side measure I.D
• Order one for your tubing and one for your ..
